Kamstrup MULTICAL 403 - USER Loop; TECH Loop

MULTICAL® 403
64
Kamstrup A/S · Technical description · FILE100000166_B_EN-55121689_M1_07.2023
6.1 ”USER loop”
”USER loop” is the meter’s primary loop, which includes legal and mostly used readings. The loop is intended for the
user and is configured according to the user’s requirements via the DDD-code. See paragraph 3.2.4 for further
information on ”USER loop” and DDD-codes.
Note: No display index numbers are used in ”USER loop”.
6.2 ”TECH loop”
”TECH loop” is intended for the technician, who is interested in viewing more readings than the ones available in
”USER loop”.
”TECH loop” is not configurable and includes all the meter’s readings as well as module readings. ”TECH loop”
comprises a number of fixed module readings as well as a number of module readings, which depend on the
installed module.
Note: Module readings can be empty due to delay or interrupted communication between meter and module. Heart
beat indication shows that both meter and display are active
The meter’s ”TECH loop” is shown below. A brief activation of the primary key makes the display reading shift to the
next primary reading, whereas a brief activation of the secondary key results in a change to secondary reading.
Primary key
Secondary key
Index
number in
display
Logger
depth in
display
Reference
numbers
1
Heat energy (E1)
2-001-00
1.1 Date of yearly logger 2-001-01
Log 01-02
1.2 Data of yearly logger
1
2-001-02
1.3 Date of monthly logger 2-001-03
Log 01-12
1.4 Data of monthly logger
1
2-001-04
2
Cooling energy (E3)
2-002-00
2.1 Date of yearly logger 2-002-01
Log 01-02
2.2 Data of yearly logger
1
2-002-02
2.3 Date of monthly logger 2-002-03
Log 01-12
2.4 Data of monthly logger
1
2-002-04