KaVo 3D eXam - Major System Items

Kavo 3D eXam ® Operators’ Manual
K990400 16 April 2008
1-2
The system consists of a Scanner and Computer Workstation. In
order for the system to operate, both the Scanner and Computer
Workstation must be turned ON.
The system captures data for 3D Skull Reconstruction for the
following procedures:
• Implants
• TM Joints
• Reconstructed Panoramic
• Reconstructed Cephalometrics
• Airway / Sinus, etc.
• Nerve Canal
• PAN - Optional Conventional Digital Panoramic Feature
Cone Beam Volumetric Tomography is a medical imaging technique
that uses X-rays to obtain cross-sectional images of the head or neck.
Quality of the images depends on the level and amount of X-ray
energy delivered to the tissue. Imaging displays both high-density
tissue, such as bone, and soft tissue. When interpreted by a trained
Physician, these images provide useful diagnostic information.
Major System Items
The system is comprised of the following major items:
• Scanner
• Computer Workstation
• Operator Control Box with 50 ft. (15.2m) Cable
• Patient Emergency Stop Box with 10 ft. (3m) Cable
• Interlock Jumper Cable, 8 inch (20cm)
• Interlock Cable 50 ft. (15.2m)
• Warning Light Cable 50 ft. (15.2m)
• Chair Connection Cable, 10 ft. (3m)
• Power Cable, 15 ft.(4.6m)
• CAT 5 Ethernet Cable, 50 ft. (15.2m)