KERN DBS

Y
es
Is the Pt-Ni band
(U17) broken or
twisted?
No
Is the force coil
(L1) contacting the
magnet assembly
(U9)?
Y
es
No
Y
es
Is the
f
o
r
c
e
c
oil
(L1) leaking?
No
Is the detector
assembly (U11)
and its adjustment
normal?
No
Y
es
No
Is the unit
assembly (U)
normal?
Y
es
Replace the unit assembly (U).
Replace the analog board assembly (B3).
Replace the EEPROM on the main board
assembly (B2).
Replace with a properly functioning unit assembly (U).
Readjust the detector assembly (U11) height.
Replace the detector assembly (U11).
Reattach the unit assembly (U).
Replace the force coil assembly (L1).
Readjust the force coil (L1)
attachment position.
Remove the unit assembly (U) and then magnetic lids.
Reinstall the Pt-Ni band (U17).
62 DBS-SH-e-1210