Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 17
To recall setup files / 237
To recall mask files / 238
To recall reference waveform files from a USB storage
device / 238
Recalling Default Setups / 238
Performing a Secure Erase / 239
19 Print (Screens)
To print the oscilloscope's display / 241
To set up network printer connections / 242
To specify the print options / 244
To specify the palette option / 244
20 Utility Settings
I/O Interface Settings / 247
Setting up the Oscilloscope's LAN Connection / 248
To establish a LAN connection / 249
Stand-alone (Point-to-Point) Connection to a PC / 250
File Explorer / 251
Setting Oscilloscope Preferences / 253
To choose "expand about" center or ground / 253
To disable/enable transparent backgrounds / 254
To load the default label library / 254
To set up the screen saver / 254
To set AutoScale preferences / 255
Setting the Oscilloscope's Clock / 256
Setting the Rear Panel TRIG OUT Source / 256
Performing Service Tasks / 257
To perform user calibration / 257
To Next Page
Loading...
