6 Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
In This Guide
This guide shows how to use the InfiniiVision 2000 X-Series oscilloscopes.
When unpacking and using the
oscilloscope for the first time, see:
• Chapter 1, “Getting Started,” starting on page 23
When displaying waveforms and
acquired data, see:
• Chapter 2, “Horizontal Controls,” starting on page 49
• Chapter 3, “Vertical Controls,” starting on page 63
• Chapter 4, “Math Waveforms,” starting on page 71
• Chapter 5, “Reference Waveforms,” starting on page
85
• Chapter 6, “Digital Channels,” starting on page 89
• Chapter 7, “Serial Decode,” starting on page 107
• Chapter 8, “Display Settings,” starting on page 113
• Chapter 9, “Labels,” starting on page 119
When setting up triggers or changing
how data is acquired, see:
• Chapter 10, “Triggers,” starting on page 125
• Chapter 11, “Trigger Mode/Coupling,” starting on
page 147
• Chapter 12, “Acquisition Control,” starting on page
155
Making measurements and analyzing
data:
• Chapter 13, “Cursors,” starting on page 171
• Chapter 14, “Measurements,” starting on page 181
• Chapter 15, “Mask Testing,” starting on page 201
• Chapter 16, “Digital Voltmeter,” starting on page 213
When using the built-in waveform
generator, see:
• Chapter 17, “Waveform Generator,” starting on page
217
When saving, recalling, or printing,
see:
• Chapter 18, “Save/Recall (Setups, Screens, Data),”
starting on page 229
• Chapter 19, “Print (Screens),” starting on page 241
When using the oscilloscope's utility
functions or web interface, see:
• Chapter 20, “Utility Settings,” starting on page 247
• Chapter 21, “Web Interface,” starting on page 267
To Next Page
Loading...
Need help?
General
