Web Interface 21
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 275
Information about controlling the oscilloscope through remote commands is
contained in the Programmer's Guide, which is included on the documentation CD
supplied with this oscilloscope. You can also access this document on the
Keysight web site.
For more information about connecting to the oscilloscope, refer to the Keysight
Technologies USB/LAN/GPIB Interfaces Connectivity Guide. For a printable
electronic copy of the Connectivity Guide, direct your Web browser to
www.keysight.com and search for "Connectivity Guide".
Save/Recall
You can save setup files, screen images, waveform data files, or mask files to your
PC via the oscilloscope's web interface (see “Saving Files via the Web
Interface" on page 275).
You can recall setup files, reference waveform data files, or mask files from your PC
via the oscilloscope's web interface (see “Recalling Files via the Web
Interface" on page 276).
Saving Files via the Web Interface
To save setup files, screen images, waveform data, Lister data, or mask files to
your PC via the oscilloscope's web interface:
1 Access the oscilloscope's web interface (see “Accessing the Web Interface" on
page 268).
2 When the oscilloscope's web interface is displayed, select the Save/Recall tab
from the left side of the Welcome screen.
3 Click the Save link.
4 On the Save page:
a Enter the name of the file you are saving to.
b Select the format.
To Next Page
Loading...
Need help?
General
