Keysight E36200 Series User Manual

Prepare Instrument for Use
Initial inspection
When you receive your power supply, inspect it for any obvious damage that may have occurred during shipment. If
there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office immediately. Refer to
www.keysight.com/find/assist.
Until you have checked out the power supply, save the shipping carton and packing materials in case the unit has to
be returned. Check the list under Standard Shipped Items and verify that you have received these items with your
instrument. If anything is missing, please contact your nearest Keysight Sales and Support Office.
Standard shipped items
– Keysight E36231A/E36232A/E36233A/E36234A autoranging DC power supply
– AC power cord
– Certificate of calibration
Shipped with the E36231A/E36232A models:
– One 10 A, 3.5 mm female 4-pin terminal block connector
– One 20 A, 7.62 mm female 4-pin terminal block connector
Shipped with the E36233A model:
– One 10 A, 3.5 mm female 4-pin terminal block connector
– Two 41 A, 7.62 mm female 4-pin terminal block connector
Shipped with the E36234A model:
– One 10 A, 3.5 mm female 4-pin terminal block connector
– Two 20 A, 7.62 mm female 4-pin terminal block connector
Documentation and firmware revisions
The Keysight E36200 Series documentation listed below can be downloaded for free through our website at
www.keysight.com/find/e36200manuals.
– Keysight E36200 Series Autoranging DC Power Supplies User's Guide. This manual.
– Keysight E36200 Series Autoranging DC Power Supplies Programming Guide.
– Keysight E36200 Series Autoranging DC Power Supplies Service Guide.
For the latest firmware revision and firmware update instruction, go to www.keysight.com/find/e36200firmware.
26
Keysight E36200 Series User's Guide

Keysight E36200 Series Specifications

General

Brand	Keysight
Model	E36200 Series
Category	Power Supply
Language	English