Turning the Unit On
After you have connected the power cord, press the [On/Standby] key to turn the unit on. The front panel display
lights up after a few seconds. When the front panel meter view appears, use the Voltage and Current knobs to enter
voltage and current values.
For the E36233A and E36234A models, Output 1 is selected by default:
E36231A /E36232A: Press the [On] key to enable the output.
E36233A/E36234A: Press one of the two [On] keys to enable an individual output or press the [All On/Off] key to
enable both outputs simultaneously.
In meter view, the power supply continuously measures and displays the output voltage and current of each output.
Keysight E36200 Series User's Guide 63
To Next Page
Loading...
Need help?
General
