Front Panel Menu Reference
This is an overview of the front-panel menus. Press the softkeys to access the front panel menus.
Menu heading Description
Source Settings >
Sense 2w/4w Configures the output sense to 2-wire or 4-wire.
Out Pref Volt/Curr Configures the preferred mode for output on/off transitions.
Protection > Configures the protection setting for the output.
Voltage Slew > Configures the voltage slew rate.
Output Settings >
On/Off Coupling > Enables or disables the output coupling or synchronization between multiple output channels.
Output Inhibit > Configures the inhibit input mode and Digital IO Pin 3.
Operation Mode > Configures the output capability when two independent outputs are being used.
Output LIST >
Run/Stopped Runs or stops the output LIST.
Add Inserts a new step to the list.
Delete Deletes a specified step from the list.
Clear All Clears all the steps in the list.
Properties > Configures the output LIST settings.
Data Logger >
Waveform Settings > Adjusts waveform vertically (voltage/division, current/division, or power/division) or horizontally (time/-
division).
Run/Stopped Runs or stops the data logger.
Properties > Configures the data log traces and voltage and current measurement ranges for individual outputs. Also
configures the data log duration, sample period, Min/Max values as well as trigger position.
Auto Scale Auto-scales the traces on the display.
Utilities >
Store/Recall > Saves and recalls instrument states.
I/O Config > Displays and configures the I/O parameters for remote operations over the USB, LAN, GPIB, or digital
IO interface.
Test/Setup > Accesses the self-test, calibration, and help function as well as configures the user preferences, and
sets date and time.
Error > Displays the instrument's error queue. Errors will be cleared after viewing or instrument reset.
Manage Files > Creates, copies, deletes, and renames files and folders on the USB drive attached to the front panel.
Also allows you to capture the current screen to either a bitmap (*.bmp) or portable network graphics
(*.png) file.
Lock | Unlock Locks and unlocks the display.
Keysight E36200 Series User's Guide 61
To Next Page
Loading...
Need help?
General
