Keysight E36200 Series User Manual

The Configure LANtab on the top allows you to change the instrument's LAN parameters; exercise caution when
doing so, as you may interrupt your ability to communicate with the instrument.
When you click the Control Instrument tab, the instrument will ask you for a password (default is keysight), and
then it will open a new page, shown below.
This interface allows you to use the instrument just as you would from the front panel. Note the curved arrow keys
that allow you to "rotate" the knob. You can press the arrow keys to rotate the knob clockwise and counter-
clockwise, just as you would press any of the other keys on the front panel.
READ WARNING
Be sure to read and understand the warning at the top of the Control Instrument page.
56
Keysight E36200 Series User's Guide

Keysight E36200 Series Specifications

General

Brand	Keysight
Model	E36200 Series
Category	Power Supply
Language	English