Keysight E36200 Series - Page 77

From the remote interface:
To program turn-on and turn-off delays for outputs 1 and 2:
OUTP:DEL:RISE 0.01,(@1)
OUTP:DEL:RISE 0.02,(@2)
OUTP:DEL:FALL 0.04,(@1)
OUTP:DEL:FALL 0.03,(@2)
To only include outputs 1 and 2 in a sequence:
OUTP:COUP:CHAN CH1,CH2
To turn on two coupled outputs in a sequence:
OUTP ON (@1:2)
Keysight E36200 Series User's Guide 77