Keysight E4990A - Page 158

E4990A Help
148
Value Description
Marker Info
X Pos
Specifies the horizontal display position by the width of
the display area as a percentage.
Marker Info
Y Pos
Specifies the vertical display position by the height of
the display area as a percentage.
Operational procedure
1. Press Channel Next (or Channel Prev) to activate the channel for
which you want to set the marker coupling.
2. Press Marker Fctn > Annotation Options.
3. Click Marker Info X Pos to set the horizontal display position.
4. Click Marker Info Y Pos to set the vertical display position.
Aligning Marker Value Display
This section describes how to align maker value displays.