E4990A Help
212
(E:) syscal. The drive is not replaced even when system
recovery is executed. Do not change any files in this.
Using USB
The E4990A has six USB ports for connecting devices: two in the front
panel and four on the rear panel. The main advantages of USB are instant
connect and disconnect, and faster data transfer speed.
The first time you plug a device into a USB port there is some wait time.
Windows reports that it is identifying the hardware, then searching for the
correct driver, then installing the driver (if it is found).
Connecting that same device back into that same port later is quick and
easy, but if you move the device to a different USB port, you will have to
wait through the hardware ID and driver search again.
Some USB memory may not operate on the E4990A.
In that case, try the other kind of USB memory. There are some
USB memories which do not work on the front panel USB port,
but work on the rear panel USB port.
Agilent Technologies shall not be responsible for, nor
assume any liability for data loss in your USB memory device
after using it with the E4990A.
Plug & Play Stability and Security
Plug & Play capabilities provide both a stable and secured operating
environment. You may also notice that it greatly reduces the number of
required reboots.
LAN Connections
Windows supports DHCP and fixed IP addressing. Also, instant connect and
disconnect of the LAN cable, as well as a visual indicator of LAN status in
system tray area, makes LAN connections more intuitive. In addition, the
Hardware Wizard helps users with system hardware configuration.
Single and Double Click option
By default, Windows allows a double-click method of launching icons. To
revert to single-clicking, see the Windows help.
Printing
Adding a printer should be done as Windows operation. See Connecting
Printer.
To Next Page
Loading...
