Keysight E4990A - Setting Windows Display

E4990A Help
134
To expand the phase, your parameter must be either |Z|-
θ/|Y|-θ or COMPLEX Z-Y. You should activate Trace 2 in the former
case, and the trace whose axis format is polar in the latter case.
2. Press the Format key to display the Format menu.
3. Press Expand Phase > ON|OFF to turn On or Off the expanded phase
feature.
Setting Windows Display
• Maximizing the specified window trace display
• Turning off the display of graticule labels
• Hiding frequency information
• Updating data on real time
• Labeling a window
• Setting display colors
• Setting display magnification
• Resizing the screen
• Superimposing Multiple Traces
Other topics about Setting Up the Display of Measurement Results
Maximizing the specified window/trace display
When using multiple channels, it is possible to maximize a specific channel
window on the screen. When multiple traces are displayed in a channel
window, it is also possible to maximize a specific trace displayed within
that channel window.
The Window/Trace Display data can be preset to factory
settings using the Preset
option.
Maximizing a window
1. Press Channel Next (or Channel Prev) to select the channel of which
window will be maximized.
2. Press Channel Max to maximize the channel window.
3. Press Channel Max one more time to reduce the window to its
previous size.
Maximizing a trace display
1. Press Channel Next (or Channel Prev) to select the channel to which
the trace belongs.
2. Press Trace Next (or Trace Prev) to select the trace of which display
will be maximized.
3. Press Trace Max to maximize the trace display.