Keysight E4990A - Reading Writing Measurement Data

Programming
273
Private Sub CmdCorrect_Click()
With Ana
.WriteString "CALC1:PAR1:SEL"
.WriteString "SENS1:SWE:TYPE LIN"
End With
End Sub
Private Sub CmdIllegalPara_Click()
With Ana
.WriteString "CALC1:PAR1:SEL"
' "LINE" is incorrect parameter. hence, this causes an error.
.WriteString "SENS1:SWE:TYPE LINE"
End With
End Sub
'Detected error is read and showed on message box.
Private Sub readErr()
Dim readErr As Variant
Ana.WriteString "SYST:ERR?"
readErr = Ana.ReadList
Ana.WriteString "*CLS", True
MsgBox "Error : " & readErr(0) & " , " & readErr(1), vbOKOnly, "Error occured."
End Sub
Private Sub EndBtn_Click()
Ana.IO.Close
Unload Me
End Sub
Reading Writing Measurement Data
Reading/Writing Measurement Data

Data Transfer Format
 Internal Data Processing
 Reading/Writing Data
Data Transfer Format