Keysight E4990A - Selecting Sweep Parameter

Measurement
79
Changing Active Trace
The active trace is the one whose settings can currently be changed. The
trace name on the screen (for example, Tr2) of the current active trace is
highlighted and indicated with to the left. To change the settings specific
to a certain trace, you must first activate the trace.
To select the active trace, use the following hardkeys:
Hardkey Function
Trace
Next
Change the active trace to the next trace with the larger
trace number.
Trace
Prev
Change the active trace to the previous trace with the
smaller trace number.
Selecting Sweep Parameter
• Selecting Sweep Type
• Setting Sweep Range