Keysight E4990A - Calculating the Mean Value, Standard Deviation, and P-P of the Trace166

E4990A Help
166
circuit.
L1
Inductance of L1 of selected equivalent circuit.
C0
Capacitance of C0 when the equivalent E is
selected.
R0
Resistance of R0 when the equivalent F and G
is selected.
The current set value of the equivalent circuit parameter is displayed
in the set parameter value field of R1, C1, L1, C0 and R0.
You can change numeric values by typing from the keyboard, keys or
rotary knob of the ENTRY block on the front panel in one of the
following ways to specify the parameter value.
• Enter the desired value with the numeric keys (0 to 9, +/- and .)
and then press one of the unit keys (G/n, M/µ, k/m or x1).
• Turn on the front panel until the desired value is set.
• Press key on the front panel to set the desired value.
5. Repeat step 1 to 4 to set all required equivalent circuit parameters.
6. Click Simulate (ON).
The selected equivalent circuit model frequency
characterization is simulated based on the equivalent circuit
parameter entered or calculated by the Calculate button. The
simulated results are stored into the memory trace and displayed on
screen.
7. Click Display (ON) to display the equivalent circuit model in schematic
and the value of each equivalent parameter on the bottom-left of the
channel window.
8. Click Export to TXT File to save the equivalent circuit parameters in
text file at user-defined location.
Calculating the Mean Value, Standard Deviation, and p-p of the Trace
• Overview
• Displaying Statistical Data
Other topics about Analysis and Processing of Result
Overview