Setting Control Functions
209
You can save the instrument state of the E4990A into a file in the mass
storage, and then recall it with the preset function to reproduce that state.
If no user preset instrument state is stored, you cannot set the user preset
function.
1. Press System > Misc Setup > Preset Setup > State.
2. Use one of the following keys for the desired setting.
Softkey Function
Factory
Specifies the normal preset function.
User
Specifies the user-preset function.
Cancel
Returns to the softkey display in one upper level.
Saving a user-preset instrument state
To execute the user-preset function, you must have a preset setting file
that has been saved. Follow these steps to save a preset instrument state
of the E4990A.
1. Press Save/Recall > Save State > User Pres.
To Next Page
Loading...
