Keysight E4990A - To Change Password; To Add and Remove User

Using Windows
215
Standard User Limitation
The standard user account has some limitation in access, especially in
performing the below tasks. These are only allowed with administrator
account:
• Change date and time settings
• Firmware update
• Enable and disable USB storage
• Enable Web Server
• Saving file under specified directories (such as the root directory)
determined by Windows
• Change User Account Control settings
User Account Control
With administrator account, you are allowed to modify the User Account
Control settings. To access the User Account Control setting, open Control
Panel, click on User Accounts > Change User Account Control settings. The
default setting is Notify me only when programs try to make changes to
my computer. With this selection, you are notified each time a program
tries to make any changes to your computer. Other available settings are
not guaranteed in the E4990A operation.
With a standard user account, default setting (Notify me only when
programs try to make changes to my computer) should be selected before
you leave from an administrator account.
To Change Password
You are allowed to change an account's password.
Change Password
1. Open User Accounts in Control Panel.
2. Click Add or remove user accounts.
3. Click on the account you would like to change password from the
Choose the account you would like to change.
4. Click Change the password.
5. Enter new password, confirm new password and password hint.
6. Click Change Password button.
To Add and Remove User
Adding new user and removing existing user can be done via Control
Panel.
Add New User