Measurement
137
Setting display colors
Selecting display mode
You can select the display mode of the LCD display from two modes:
normal display (background: black) or inverted display (background:
white). In normal display, the colors of items are preset so that you can
recognize them easily on the display of the instrument. On the other hand,
in inverted display, they are preset to colors obtained by inverting the
default settings to the normal display so that you can use data easily when
storing it into a graphic file.
The selection procedure is as follows:
1. Press Display.
2. Click Invert Color to select the display color. OFF indicates the normal
display; ON the inverted display.
Setting display color for each item
You can set the display color to the normal display or inverted display
separately for each of the following items:
• Data/memory trace
• Labels and lines of graphs
• File display of the limit test and limit lines
• Background
Set the color of each item by specifying the amounts of red (R), green (G),
and blue (B) contained in the color. You can specify each level of R, G, and
B in 6 steps (0 to 5). Therefore, total of 216 colors are available by
combining them. The table below shows the R, G, and B values for the
main colors as a reference.
To Next Page
Loading...
