Measurement
169
each ACV data divided by ACI, that resulting trace is as same as absolute
Z. For a 201 point sweep setup, the computation is repeated 201 times,
once for each point.
Using Equation Editor
The step-by-step procedure of using Equation Editor is described below:
Equation Editor Dialog box
1. Select a trace in which you want to enter the equation and activate
the trace.
Activating a trace is required as Equation Editor
works on traces.
2. Follow the steps below to enter an equation:
1. Press Display.
2. Click Equation Editor (1 in the figure above). The Equation Editor
dialog box appears.
3. Enter an equation in the equation field (4 in the figure above).
To Next Page
Loading...
