Quick Start
25
24 Bit (Handler) I/O Port
The terminal to which an automatic machine (handler) used on a
production line is connected. See 24 Bit (Handler) I/O Port
.
Connector type: 36-pin Ribbon (Centronics) connector
Certificate of Authenticity Label
The label shows the license information of the Windows Operating System
Ethernet Port
A terminal for connecting the E4990A to a LAN (Local Area Network).
Connecting this instrument to a LAN enables you to access the hard disk
drive of this instrument from an external PC or to control this instrument
by using SICL-LAN or telnet.
Specification Value
Connector type 8-pin RJ-45 connector
Base Standard 10Base-T/100Base-TX/1000Base-T
External Monitor Output Port (VIDEO)
A terminal to which an external color monitor (display device) can be
connected. By connecting a color monitor to this terminal, the same
To Next Page
Loading...
