Quick Start
29
• Softkey Menu Bar
Channel Window
Window for displaying the traces. Because a channel corresponds to a
window, it is called a channel window. When the outer frame of a channel
window is displayed in light gray, it shows that the channel is an active
channel (the channel for which setup is being performed). In the following
figure, Channel 1 (the upper window) is the active channel.
Channel 1 Window and Channel 2 Window describes different
measurement parameters available in the channel measurement window.
The measurement parameters described in the Channel 1 and 2 Window
correspond to the same channel measurement window and are displayed in
separate windows for ease of read.
To Next Page
Loading...
