Keysight E4990A - Page 441

Programming
431
Display > Frequency
COM Command Syntax (Internal Control Only)
SCPI.DISPLAY.ANNOTATION.FREQUENCY.STATE
:DISP:CCL
Type
Command
Syntax
:DISPlay:CCLear
Description
This command clears the caution/error message displayed in the status bar
(at the bottom of the LCD display).
Examples
Ana.WriteString ":DISP:CCL", True
Equivalent Softkey
No equivalent key is available on the front panel.
COM Command Syntax (Internal Control Only)
SCPI.DISPLAY.CCLEAR
:DISP:CLOC
Type
Command/Query
Syntax
:DISPlay:CLOCk {ON|OFF|1|0}
:DISPlay:CLOCk?
Description
This command show/hide the clock display in the instrument status bar (at
the right bottom of the LCD display).
Variable
Parameter Selection Option
Description ON/OFF of the clock display
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value ON
Query Response