Keysight E4990A - Page 447

Programming
437
SCPI.DISPLAY.COLOR(Dnum).LIMIT(Lnum)
:DISP:COL<Dnum>:RES
Type
Command
Syntax
:DISPlay:COLor<Dnum>:RESet
Description
This command resets the display color settings for all the items to the
factory preset state.
<Dnum> Normal display: 1, Inverted display: 2
Examples
Ana.WriteString ":DISP:COL1:RES", True
Related Commands
Equivalent Softkey
System > Misc Setup > Display Setup > Color Setup > Normal | Invert >
Reset Color > OK
COM Command Syntax (Internal Control Only)
SCPI.DISPLAY.COLOR(Dnum).RESET
:DISP:COL<Dnum>:TRAC<Tr>:DATA
Type
Command/Query
Syntax
:DISPlay:COLor<Dnum>:TRACe<Tr>:DATA <Value1>, <Value2>,
<Value3>
:DISPlay:COLor<Dnum>:TRACe<Tr>:DATA?
Description
This command sets/gets the color of the data trace.
<Dnum> Normal display: 1, Inverted display: 2.
Variable
Parameter Value1
Description Red
Data Type Numeric type (Integer)
Range 0 to 5