Keysight E4990A - Page 464

E4990A Help
454
Description
This command turns ON/OFF the maximization of the active trace.
Only the maximized active trace is displayed in the window and the other
traces are not displayed.
Variable
Parameter Selection Option
Description ON/OFF of the maximization of the active trace
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value OFF
Query Response
{1|0}<newline><^END>
Examples
Dim Var as Integer
Ana.WriteString ":DISP:WIND1:MAX ON", True
Ana.WriteString ":DISP:WIND1:MAX?", True
Var=Ana.ReadNumber
Related Commands
:DISP:MAX
Equivalent Softkey
Trace Max
COM Command Syntax (Internal Control Only)
SCPI.DISPLAY.WINDOW(Ch).MAXIMIZE
:DISP:WIND<Ch>:SPL
Type
Command/Query
Syntax
:DISPlay:WINDow<Ch>:SPLit
{D1|D1_2|D12|D1_2_3|D12_34|D1_1_2|D112|D12_33|D13_23|D123|D1
1_23|D12_13|D1234|D1_2_3_4}
:DISPlay:WINDow<Ch>:SPLit?
Description