Quick Start
41
Pressing and Enter key on the front panel or pressing Enter key on the
keyboard causes the highlighted (selected) softkey to be executed. You can
change which softkey in the menu is highlighted by turning or pressing
key on the front panel or by pressing key on the keyboard.
Pressing the key on the front panel or the key on the keyboard brings
up the upper level softkey menu, and pressing the key on the front panel
or the key on the keyboard brings up the lower level softkey menu.
Scroll Arrow (Large)
When the softkeys in a menu overflow the screen, use this key to enable you
to scroll the menu page by page. Both upward and downward scroll arrows
are available. Use the mouse to manipulate these buttons.
Scroll Arrow (Small)
Using this button, you can scroll the menu one softkey at a time. Both
upward and downward scroll arrows are available. Use the mouse to
manipulate these buttons.
Scroll Bar
When the softkeys in a menu overflow the screen, clicking on the blank part
of the scroll bar enables you to scroll the softkey menu up or down.
Scroll Box
You can scroll the softkey menu up or down by using the mouse to select
and drag the scroll box (pressing the button on the object to be moved and
then releasing the button at the desired location). The length and position of
the scroll box indicate the length and position of the currently displayed part
of the softkey menu relative to the entire menu.
Selection Mark
Shows which softkey function is currently selected.
Softkeys
These are the actual keys you would use to perform setup. A displayed to
the right of a softkey indicates that pressing that softkey displays the lower
layer of softkeys.
Softkey Menu Title
The title of the softkey menu is displayed here. Double-clicking on this part
of the menu bar displays the top layer of softkeys.
Softkey Status Display
Displays a softkey's setup status.
You can hide the frequency information in order to ensure its confidentiality
or for other reasons. See Hiding Softkey's Frequency Information.
To Next Page
Loading...
