Keysight E4990A - Page 548

E4990A Help
538
:SENS<Ch>:CORR2:EDEL:TIME
Type
Command/Query
Syntax
:SENSe<Ch>:CORRection2:EDELay:TIME <Value>
:SENSe<Ch>:CORRection2:EDELay:TIME?
Description
This command sets/gets the port extension value in time.
SENS:CORR1:EDEL:TIME causes an undefined header error.
Variable
Parameter Value
Description Port extension value
Data Type Numeric type (Real)
Range -
Preset Value 0
Unit sec
Resolution -
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Double
Ana.WriteString ":SENS1:CORR1:EDEL:TIME ON", True
Ana.WriteString ":SENS1:CORR1:EDEL:TIME?", True
Var=Ana.ReadNumber
Related Commands
:SENS:CORR:EDEL:STAT
:SENS:CORR:EDEL:LENG
Equivalent Softkey
Cal > Port Extension > Extension (Time)
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).CORRECTION(Type).EDELAY.TIME