Keysight E4990A - Page 560

E4990A Help
550
Description
This command returns the number of points of frequency stimulus array of
short for the fixture compensation. SENS:CORR1:ZME:SHOR:POIN causes
an undefined header error.
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Long
Ana.WriteString ":SENS1:CORR2:ZME:SHOR:POIN?", True
Var=Ana.ReadNumber
Related Commands
:SENS:CORR:ZME:SHOR:FREQ
Equivalent Softkey
No equivalent key is available on the front panel.
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).CORRECTION(2).ZMEAS.SHORT.POINTS
:SENS<Ch>:DC:MEAS:CLE
Type
Command
Syntax
:SENSe<Ch>:DC:MEASure:CLEar
Description
This command clears DC Monitor measurement data.
Examples
Ana.WriteString ":SENS1:DC:MEAS:CLE", True
Related Commands
:SENS:DC:MEAS:ENAB
Equivalent Softkey
Meas > DC Monitor Setup > Clear
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).DC.MEASURE.CLEAR
:SENS<Ch>:DC:MEAS:DATA:DCI
Type
Query
Syntax
:SENSe<Ch>:DC:MEASure:DATA:DCI?
Description
This command returns the DC Monitor current measurement data at the
sweep start.