Keysight E4990A - Page 575

Programming
565
Description Sweep direction
Data Type Character string type (String)
Range UP|DOWN
Preset Value UP
Query Response
{UP|DOWN}<newline><^END>
Examples
Dim Var as String
Var= "UP"
Ana.WriteString ":SENS1:SWE:DIR " & Var, True
Ana.WriteString ":SENS1:SWE:DIR?", True
Var=Ana.ReadString
Related Commands
:SENS:SWE:TYPE
Equivalent Softkey
Sweep Setup > Direction
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).SWEEP.DIRECTION
:SENS<Ch>:SWE:PDEL
Type
Command/Query
Syntax
:SENSe<Ch>:SWEep:PDELay <Value>
:SENSe<Ch>:SWEep:PDELay?
Description
This command sets/gets the point delay time.
Variable
Parameter Value
Description Point Delay time
Data Type Numeric type (Real)