Keysight E4990A - Page 577

Programming
567
Range 2 ~ 1601
Preset Value 201
Unit -
Resolution -
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Long
Var= 2
Ana.WriteString ":SENS1:SWE:POIN " & Str(Var), True
Ana.WriteString ":SENS1:SWE:POIN?", True
Var=Ana.ReadNumber
Related Commands
:SENS:SEGM:SWE:POIN
Equivalent Softkey
Sweep Setup > Points
Instrument Setup > Points
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).SWEEP.POINTS
:SENS<Ch>:SWE:TIME
Type
Command/Query
Syntax
:SENSe<Ch>:SWEep:TIME <Value>
:SENSe<Ch>:SWEep:TIME?
Description
This command sets/gets the additional sweep time.
Variable
Parameter Value
Description Additional sweep time
Data Type Numeric type (Real)