Keysight E4990A - Page 622

E4990A Help
612
Description Voltage level
Data Type Numeric type (Real)
Range 5m ~ 1
Preset Value 500m
Unit V
Resolution 1m
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Double
Var= 0.005
Ana.WriteString ":SOUR1:VOLT " & Str(Var), True
Ana.WriteString ":SOUR1:VOLT?", True
Var=Ana.ReadNumber
Related Commands
:SOUR:MODE
Equivalent Softkey
Sweep Setup > OSC Level > Voltage Level
COM Command Syntax (Internal Control Only)
SCPI.SOURCE(Ch).VOLTAGE.LEVEL.IMMEDIATE.AMPLITUDE
:SOUR<Ch>:VOLT:CENT
Type
Command/Query
Syntax
:SOURce<Ch>:VOLTage:CENTer <Value>
:SOURce<Ch>:VOLTage:CENTer?
Description
This command sets/gets the center of voltage value in OSC level sweep.
Variable
Parameter Value