Features of your vehicle
784
-CD display (for Type B cluster)
This indicator displays which exte
-
rior light is selected using the light
-
ing control.
You can activate or deactivate
8iper/Lights Display function from
the User Settings mode in the clus
-
ter LCD display.
Wiper mode
This indicator displays which wiper
speed is selected using the wiper
control.
You can activate or deactivate
8iper/Lights display function from
the User Settings mode in the clus
-
ter LCD display.
Engine has overheated
䳜 This warning message illumi
-
nates when the engine coolant
temperature is above 120C
(248F). This mean that the
engine is overheated and may be
damaged.
* If your vehicle is overheated, refer
to "If the engine overheats" on
page 6-8.
Shift to P (for smart key system
and Automatic Transmission/Dual
Clutch Transmission)
䳜 This warning message illumi
-
nates if you try to turn off the
engine without the shift lever in P
(Park) position.
䳜 At this time, the ENGINE STA3T/
STOP button turns to the ACC
position (If you press the ENGINE
STA3T/STOP button once more, it
will turn to the ON position).
-ow key battery (for smart key
system)
䳜 This warning message illumi
-
nates if the battery of the smart
key is discharged when the
ENGINE STA3T/STOP button
changes to the OFF position.
Press START button whilst turning
wheel (for smart key system)
䳜 This warning message illumi
-
nates if the steering wheel does
not unlock normally when the