EasyManua.ls Logo

Kia Stonic YB 2021 - Page 163

Kia Stonic YB 2021
640 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
79
4
4
Features of your vehicle -CD display (for Type B cluster)
ENGINE STA3T/STOP button is
pressed.
It means that you should press
the ENGINE STA3T/STOP button
whilst turning the steering wheel
right and left.
Check steering wheel lock system
(for smart key system)
This warning message illumi
-
nates if the steering wheel does
not lock normally when the
ENGINE STA3T/STOP button
changes to the OFF position.
Press brake pedal to start engine
(for smart key system and Auto
-
matic Transmission/Dual Clutch
Transmission)
This warning message illumi
-
nates if the ENGINE STA3T/STOP
button changes to the ACC posi
-
tion twice by pressing the button
repeatedly without depressing
the brake pedal.
It means that you should depress
the brake pedal to start the
engine.
Press clutch pedal to start engine
(for smart key system and Manual
Transmission)
This warning message illumi
-
nates if the ENGINE STA3T/STOP
button changes to the ACC posi
-
tion twice by pressing the button
repeatedly without depressing
the clutch pedal.
It means that you should depress
the clutch pedal to start the
engine.
Press brake and clutch pedals to
start engine (for smart key system
and Intelligent Manual Transmis
-
sion)
This warning message illumi
-
nates if the ENGINE STA3T/STOP
button changes to the ACC posi
-
tion twice by pressing the button
repeatedly without depressing
the brake and clutch pedals.
It means that you should depress
the brake and clutch pedals to
start the engine.
Key not in vehicle (for smart key
system)
This warning message illumi
-
nates if the smart key is not in
the vehicle when you press the
ENGINE STA3T/STOP button.
It means that you should always
have the smart key with you.
Key not detected (for smart key
system)
This warning message illumi
-
nates if the smart key is not
detected when you press the
ENGINE STA3T/STOP button.

Table of Contents