Kia Stonic YB 2021 - Page 164

Features of your vehicle
804
-CD display (for Type B cluster)
Press START button again (for
smart key system)
䳜 This warning message illumi
-
nates if you can not operate the
ENGINE STA3T/STOP button when
there is a problem with the
ENGINE STA3T/STOP button sys
-
tem.
䳜 It means that you could start the
engine by pressing the ENGINE
STA3T/STOP button once more.
䳜 If the warning illuminates each
time you press the ENGINE
STA3T/STOP button, have the
vehicle inspected by a profes
-
sional workshop. Kia recom
-
mends to visit an authorised Kia
dealer/service partner.
Press START button with key (for
smart key system)
䳜 This warning message illumi
-
nates if you press the ENGINE
STA3T/STOP button whilst the
warning message 䳖Key not
detected䳗 is illuminating.
䳜 At this time, the immobiliser indi
-
cator light blinks.
Check BRAKE SWITCH fuse (for
smart key system and Automatic
Transmission/Dual Clutch Trans
-
mission)
䳜 This warning message illumi
-
nates if the brake switch fuse is
disconnected.
䳜 It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the ENGINE
STA3T/STOP button for 10 sec
-
onds in the ACC position.
Shift to P or N to start engine (for
smart key system and Automatic
Transmission/Dual Clutch Trans
-
mission)
䳜 This warning message illumi
-
nates if you try to start the
engine with the shift lever not in
the P (Park) or N (Neutral) posi
-
tion.
NOTICE
You can start the engine with the
shift lever in the N (Neutral) posi
-
tion. But, for your safety, we rec
-
ommend that you start the engine
with the shift lever in the P (Park)
position.
Check exhaust system (if equipped)
䳜 This warning message illumi
-
nates if the PPF system has a
malfunction.
䳜 At this time, PPF warning light
also blinks.
In this case, have the vehicle
inspected by a professional work
-
shop. Kia recommended to visit an
authorised Kia dealer/service
partner.