141
5
5
Driving your vehicle Smart Cruise Control (SCC)
䳜 Driving through a roadside with
trees or streetlights
䳜 The adverse road conditions
cause excessive vehicle vibrations
whilst driving
䳜 Your vehicle height is low or high
due to heavy loads, abnormal tyre
pressure, etc.
䳜 Driving through a narrow road
where trees or grass or over
-
grown
䳜 There is interference by electro
-
magnetic waves, such as driving in
an area with strong radio waves
or electrical noise
䳜 Driving on a curve
On curves, Smart Cruise Control
may not detect a vehicle in the
same lane, and may accelerate to
the set speed. Also, vehicle speed
may rapidly decrease when the
vehicle ahead is detected suddenly.
Select the appropriate set speed on
curves and apply the brake pedal or
accelerator pedal according to the
road and driving conditions ahead.
Your vehicle speed can be reduced
due to a vehicle in the adjacent lane.
Apply the accelerator pedal and
select the appropriate set speed.
Check to be sure that the road con
-
ditions permit safe operation of
Smart Cruise Control.
䳜 Driving on a slope
During uphill or downhill driving,
Smart Cruise Control may not
detect a moving vehicle in your lane,
and cause your vehicle to accelerate
to the set speed. Also, vehicle speed
will rapidly decrease when the vehi
-
cle ahead is detected suddenly.
To Next Page
