Maintenance
117
-ight bulbs
Front fog lamp
Head lamp low beam (-HD Vehicle)
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the pic
-
ture.
3. 8hen aiming the low beam, vertical aiming should be adjusted after
adjusting the horizontal aiming.
4. If head lamp levelling device is equipped, adjust the head lamp levelling
device switch with 0 positions.
vehicle con
-
dition
)eadlamp (LED tZpe)
Ground )eight Distance between lamps
Low beam )igh beam Low beam )igh beam
)1䳗 )䳗 8䳗 8䳗
8ithout
driver / [mm
(in)]
(2.) 0 (2.1) 1, (.) 1,112 (.)
8ith driver /
[mm (in)]
1 (2.) (2.) 1, (.) 1,112 (.)
7FIJDMF DPOEJUJPO
'SPOU 'PH MBNQ #VMC UZQF
(SPVOE )FJHIU %JTUBODF CFUXFFO MBNQT
)3 83
8ithout driver / [mm (in)] (1.) 1,1 (.)
8ith driver / [mm (in)] (1.0) 1,1 (.)
To Next Page
