Kone NanoSpace - Page 107

KONE NanoSpace™
Owner’s Manual
106 (196) OM-01.03.086
(B) 2016-01-11
© 2014 KONE Corporation
All rights reserved.
4 Make a car call from the bottom floor
and go to the landing. Stop the elevator
at a suitable position by operating the
emergency opening key.
Elevator car must be at a suitable height
(A) for saf
e
moving between the landing
and the pit, and for accessing the belt
tensioning device from the pit floor. Use
work stool, if needed.
5 Open the landing door with emergency
opening
key.
6 Check that the pit safety device is
activated.
7 Check the
position of the elevator car. Elevator car must be at a suitable height
for safe
moving between the landing and
the pit, and for accessing the belt
tensioning device from the pit floor. Use
work stool, if needed.
8 Standing on the landing, press the stop
swit
ch.
Step Action Illustration/Note
SGI
$
SGI
1089384.wmf