KONE NanoSpace™
Owner’s Manual
189 (196) OM-01.03.086
(B) 2016-01-11
© 2014 KONE Corporation
All rights reserved.
APPENDIX H.CLEANING
Cleaning is an important aspect of elevator maintenance. It is essential that the elevator car
and the visible elevator components on the landings, especially the sill grooves, are cleaned
on a regular basis.
It is also essential that the elevator car and the visible elevator components on the floors be
cleaned on a regular basis. The elevator car contains special materials, some of which are
not resistant to powerful cleansers, for example, solvents. When cleaning the operating
panels, follow the instructions given for car operating panels.
NOTE! Always follow the material safety data sheet instructions for the cleanser to prevent
adverse health effects.
CAUTION! Do not use strong solvents, corrosive or strong alkaline substances when
cleaning the elevator car. These substances can damage the interior materials. Acetone
and thinners are particularly harmful to plastic parts in the elevator car.
CAUTION! Never use excessive amounts of water. When instructed to use water, only
use a moist cloth or similar. Do not use moist cloths that include magnesium chloride or
sodium chloride as they are harmful for stainless steel surfaces.
WARNING! Do not attempt to clean the insides of the elevator shaft, MAP or the control
cabinet. This must be left to trained maintenance personnel.
To Next Page
Loading...