Kone NanoSpace - Testing the Belt Tensioning Device Safety Switches

KONE NanoSpace™
Owner’s Manual
105 (196) OM-01.03.086
(B) 2016-01-11
© 2014 KONE Corporation
All rights reserved.
10.9 Testing the belt tensioning device safety switches
The following sections describe testing the operation of the belt
tensioning device safety switches.
Step Action Illustration/Note
1 Enable the landing calls and the door
opening.
LCEUI switche
s 261 and 263.
2 Close and lock the maintenance access
panel.
3 Go
to the bottom floor.
1085430.wmf
1072612.wmf