KONE NanoSpace™
Owner’s Manual
39 (196) OM-01.03.086
(B) 2016-01-11
© 2014 KONE Corporation
All rights reserved.
7.2 Shaft access monitoring (optional)
The elevator may have an optional Shaft Access Monitor (SAM). It detects if someone has
entered the shaft and prevents the car from moving. If the elevator has SAM and you open a
landing door, for example to estimate where the car is, SAM prevents the elevator from
moving and the fault F0089 displays until you reset SAM.
Related information: APPENDIX B. Resetting the safety devices.
Use barriers to segregate your work
are
a
so that your work does not cause
a hazard to others. Keep access ways
and fire exits clear.
The keys to the machine room /
maintenance
access panel and landing
doors must be kept in a secure place
inaccessible to unauthorized persons.
The keys can be given only to
competent maintenance persons.
WARNING! SAM protects persons working in the shaft. Before you reset
SAM, always verify that nobody is in the shaft.
Safety precautions Note
To Next Page
Loading...