Kone NanoSpace - Page 135

KONE NanoSpace™
Owner’s Manual
134 (196) OM-01.03.086
(B) 2016-01-11
© 2014 KONE Corporation
All rights reserved.
Removing the balancer weight screen
Block the door to fully slightly position with
door blocking tool.
x = 100 mm.
WARNING! In elevators
with the smallest
pits, the pit ladders must be returned to the
storage position after climbing to the pit.
When fixed to the door sill, the pit ladders
interfere with the required safety space in the
pit. To block the doors, use the door blocking
tool.
SGI
;
SGI
6 ×
SGI