Kone NanoSpace - Page 184

KONE NanoSpace™
Owner’s Manual
183 (196) OM-01.03.086
(B) 2016-01-11
© 2014 KONE Corporation
All rights reserved.
F.3 Belt side abrasion
– Damaged polyurethane coating.
– Strands exposed on side of the belt.
F.4 Belt back abrasion
– Belt tooth abrasion / missing teeth
Appearance Possible root cause Action
1. Bad pulley alignment.
2. Presence of particles
betwee
n belt and
protective covers or
damaged
pulley / traction
sheave.
3. Loosen/damaged
prote
c
tive covers.
Remov
e the el
evator from
service immediately!
Replace the belt.
1. Adjust alignment.
2. Remove particles. Check
pulleys and traction
she
ave and replace if
damaged.
3. Check protective covers.
Appearance Possible root cause Action
1. Presence of particles
between belt and
protective covers or
damaged
pulley / traction
sheave.
2. Loosen/damaged
protective covers.
Remove the el
evator from
service immediately!
Replace the belt.
1. Remove particles. Check
pulleys and traction
she
ave and replace if
damaged.
2. Check protective covers.