Kone NanoSpace - Page 42

KONE NanoSpace™
Owner’s Manual
41 (196) OM-01.03.086
(B) 2016-01-11
© 2014 KONE Corporation
All rights reserved.
Table 10: Maintenance items and intervals (in months)
ITEM INSPECTIO
N
ACTIONS TO BE MADE IF NECESSARY
LUBRICATIO
N
ADJUSTING CLEANING
HOISTING MACHINE
Belt guards 12
Wear of drive belts 12
Machine: Tightness of the fastenings 12
Machine: Function of brake and
man
ual r
elease device
12
Machine: Bearings 12
Load weighing device 12
SHAFT EQUIPMENT
Guide rails and fixings 12 x (guide rails) x (fixings) x
Balancing weights: guide rollers and
guide lubricators, if used
12 x
Balan
cing weights: rope suspension,
diverting
pulley, diverting pulley bearing
12 x x x
Overspeed governor and rope, tension
weight: fixings, ope
ration
12 x x
Electrical installations and travelling
cables
12
Floo
r positioning devices 12 x x
Limit switches 12 x
Lighting, ventilation and drainage 12 x
Buffers 12
Shaft pit: check that the pit bottom is
dry
12 x
Water sensor 12
Pit safety device 12
Pit ladder 12
SLING AND CAR EQUIPMENT
Car sling: bolts/joints 12
Fixing of car sling, insulators 12
Guide shoe 12 x
Guide lubricators, if used 12 x (re-filling)
Mounting of suspension ropes 12 x
Function of safety gear 12 x x
Belt tensioning device 12 x
Elevator documents 12