Konica Minolta KDR AU DDR - System Overview

12
KMHA 500-000099
Revision D
KDR
TM
AU-DDR Advanced U-Arm System with
Dynamic Digital Radiography (KDR AU DDR)
I. INTRODUCTION
4.3 System Overview
Figure 4.3.1 and Table 4.3.1 illustrate and describe all components of the KDR™ AU DDR system.
Figure 4.3.1
KDR AU DDR
Table 4.3.1
KDR AU DDR Component Descripons
Figure Number Component Description
1-13 KDR AU DDR The enre KDR AU DDR system
1 Generator
1.1 Generator – main cabinet Generates the high voltage (40-150 KV) required
by the X-ray tube; interfaces with the X-ray tube,
automac exposure control (AEC,) at panel de-
tector, and acquision staon.
1.2 Generator Exposure Control On/o and exposure buon.
2 Generator Interface Unit Interface unit for imaging system synchronizaon
with the generator. Enables start synchronizaon
between the generator and the FPD.
3 Interface Power Supply Power supply unit for the FPD and the generator
interface unit.
4 PC, Keyboard, Mouse PC used for the acquision staon. DDR Minimum
requirements: i7, 16GB, 512 SSD.
5 Monitor Touch screen monitor