Konica Minolta magicolor 8650 - To Empty the Punch Scrap Box in the Finisher FS-609

12
Replacing consumables
12-24 magicolor 8650
12.5.2 To empty the punch scrap box in the finisher FS-609
Follow the procedure described below to empty the punch scrap box.
1 Slide the finisher away from the machine.
2 Pull out the punch scrap box.
3 Empty the punch scrap box.
4 Insert the punch scrap box into its original position.
5 Slide the finisher back against the machine.
EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500