Konica Minolta magicolor 8650 - Paper

2
Before using the machine
2-20 magicolor 8650
2.3 Paper
Use paper that meets the following specifications.
2.3.1 Possible paper sizes
Non-standard-sized paper:
* Banner paper
Paper width: 210mm to 297mm
Paper length: 457.3mm to 1200mm
Standard-sized paper:
*1
For thick paper 4, only A3 w, A4 v, 11 e 17 w and Letter v are available for printing.
*2
This is one size larger than A3. 12-1/4 e 18 is equivalent to 311.1 mm e 457.2 mm, and 12 e 18 is equivalent
to 304.8 mm e 457.2 mm.
*3
There are five Foolscap sizes: 220 e 330mm w, 8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w, and
8 e 13 w. Any one of these sizes can be selected. Changing this menu must be performed by a service
engineer.
*4
Statement w can be used with the North American (inch) model only.
*5
A5 w can be used with the European (metric) model only.
Paper source Paper width Paper length
Tray 1 (bypass tray)* 90.0mm to 311.1mm 139.7mm to 1200.0mm
Tray 2 – –
Tray 3
Single/Double paper feed
cabinets
Tray 4 (LCT)
Double-sided prints 139.7mm to 311.1mm 148mm to 457.2mm
Paper source Paper size
Tray 1 (bypass tray)
*1
12 e 18 w
*2
to Statement w/v (A3 w to B6 w, A6 w, 8 e 13 w
*3
, 16K w/v, 8K w)
Tray 2 11 e 17 w to Letter w/v, Statement w (A3 w to B5 w/v, A5 w, 8 e 13 w
*3
, 16K v,
8K w)
Tray 3 12 e 18 w
*2
to Letter w/ v, Statement w (A3 w to B5 w/v, A5 w, 8 e 13 w
*3
, 16K v,
8K w)
Single/Double paper feed
cabinets
11 e 17 w to Letter w/v, Statement w (A3 w to B5 w/v, A5 w, 8 e 13 w
*3
, 16K v,
8K w)
Tray 4 (LCT) Letter v (A4 v)
Double-sided prints 12 e 18 w
*2
to Statement, 12-1/4 e 18 w, 4 e 6 w (A3 w to A5 w/v, 8 e 13 w
*3
,
16K w/v, 8K w)
EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500