Features Overview (continued)
1-4 Introduction
Introduction
• Manual Shut-off
Shuts off the main power when pressing [POWER SAVER ON/OFF] key.
• Non Standard Size for Multi-Sheet Bypass Tray
Allows special paper size to be loaded in the Multi-sheet bypass tray and entered using the
touch screen keypad in order to avoid paper misfeed.
• Output mode for Machine with FS-110/210 Finisher Installed:
Non-Sort, Sort, Staple-Sort, and Group modes using the primary (main) tray
Non-Sort Face Down exit, Non-Sort Face Up exit, Group Face Down exit, and
Group Face Up exit modes using the secondary (sub) tray
Folding, Stapling & Folding, and 3-Folding modes using the booklet tray (FS-210
only)
• Output mode for FS-110/210 Finisher with PI-110 Cover Sheet Feeder Installed:
Cover Sheet mode
Manual Staple mode
For details of each output mode, see Section 6: Output Modes.
•Paper Capacity
Total 2,600 sheets, including two 500-sheet trays, a 1,500-sheet tray, and a 100-sheet
Multi-sheet bypass tray.
Total 6,600 sheets, including 4,000-sheet optional large capacity tray.
•Power Saver
Automatically turns off all but nominal power supply after a specified period of printer
inactivity, for optimal efficiency. Power is returned after a brief warm up period by pressing
the [
POWER SAVER ON/OFF] key on the Control panel.
• Proof Print
To ensure correct output before running multiple prints, run a proof print by touching
PROOF PRINT
on the Check Screen.
• Punch Mode for FS-110/210 Finisher with PK-110/120 Punching Kit Installed:
Punches three holes in output prints.
• Punch / Z-Folding Mode for FS-110/210 Finisher with PZ-108 Punching / Z-Folding Unit
Installed:
Punches three holes in output prints and Z-fold printed sheets.
To Next Page
Loading...
