4-2 Media Information
Media Information
Main Body Trays
Paper Size: STD size: 11"x17", F4, 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A3,
B4, A4, A4R, B5, B5R, A5 (user-adjustable)
STD size (spec.): specify A4R instead of 8.5"x11"R
specify A5 instead of 5.5"x8.5"
Non STD size: input the measures of paper between max. 314 mm x 459
mm and min. 210 mm x 140 mm.
Wide paper: 11"x17"W, 8.5"x11"W, 8.5"x11"WR, 5.5"x8.5"W, A3W,
B4W, A4W, A4WR, B5W, A5W (user-adjustable)
NOTES: • F4: 8"x13", 203 mm x 330 mm
A3: 11.69"x16.54", 297 mm x 420 mm
B4: 10.11"x14.33", 257 mm x 364 mm
A4: 8.27"x11.69", 210 mm x 297 mm
B5: 7.17"x10.11", 182 mm x 257 mm
A5: 5.85"x8.27", 148 mm x 210 mm
• 5.5"x8.5"/A5 print paper is available in portrait orientation loading only.
• 8.5"x14"W print paper is not available.
• STD size (spec.)/Non STD size/Wide paper setting for each tray can be made in the Key Operator
mode. See p. 9-18 ~ p. 9-19.
Paper Weight: General tray: 16~24 lb
Tray specified in Thick : 25~110 lb (200 g/m
2
thick paper)
Tray specified in Thin: 13~15 lb (simplex mode only)
Tray specified in Tab paper: 25~45 lb (simplex mode only)
NOTE: Paper type setting for each tray can be made in the Key Operator mode. See p. 9-18 ~ p. 9-19.
Paper Capacity: Tray 1/2: 500 sheets 20lb/ user-adjustable to any standard/wide size
from 11"x17"/W~5.5"x8.5"/W
Tray 3: 1,500 sheets 20lb/ user-adjustable to any standard/wide size
from 11"x17"/W~5.5"x8.5"/W
2,600 sheets, including 100-sheet Multi-Sheet Bypass Tray
NOTE: Reliability and print quality are not guaranteed for all special papers. Use only paper that is
recommended by Konica.
To Next Page
Loading...
