Konica Minolta Network Printer - Automatic Duplex Unit; Multi-Sheet Bypass Tray

4-4 Media Information
Media Information
Automatic Duplex Unit
Paper Size: STD size: 11"x17"~5.5"x8.5"
STD size (spec.): 11"x17"~A5
Wide paper: 11"x17"W~A5W
NOTE: 5.5"x8.5"/W and A5/W print paper is available in portrait orientation feeding only.
Paper Weight: 16~110 lb (200 g/m
2
thick paper)
Multi-Sheet Bypass Tray
Paper Size: STD size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5",
5.5"x8.5"R, A3, B4, A4, B5, B5R
STD size (spec.): F4, A4R, A5, A5R, B6R
Non STD size: input the measures of paper between max. 314 mm x
459 mm and min. 100 mm x 148 mm
Wide paper: 11"x17"W, 8.5"x11"W, 8.5"x11"WR, 5.5"x8.5"W,
5.5"x8.5"WR, A3W, B4W, A4W, A4WR, B5W, B5WR,
A5W, A5WR
Paper Weight: General mode: 16~24 lb
Thick mode: 25~110 lb (200 g/m
2
thick paper)
Thin mode: 13~15 lb
Tab paper mode: 25~45 lb
OHP transparencies, labels, hole punch, and rag content can be loaded.
Paper Capacity: 100 sheets 20 lb stacked: single feed special stock
NOTE: Reliability and print quality are not guaranteed for all special papers. Use only paper that is
recommended by Konica.